Follow

LifeBand Care Instructions

The LifeBand requires minimal maintenance and only as required.

Regularly charge the LifeBand to ensure there is sufficient run time for your shifts.

  • LifeBand;
  • Damp cleaning cloth; and
  • Dry cloth

Task

Description

 Charge the LifeBand

Connect the LifeBand to a charging source.

Regularly charge the LifeBand to ensure there is sufficient run time for your shifts.

 Clean the LifeBand

Regularly clean your LifeBand.

SmartCap recommends:

  • Replace sensor dots as required
  • Spot clean fabric only with a damp cloth

IF the copper contacts aren't cleaned before applying the new sensor dots, it may not make good contact. This is because the residue of glue is not conductive. The best way to clean would be using Isopropyl alcohol on the end of a cotton ear bud or equivalent

  • Do not bleach
  • Lay flat to dry
  • Do not iron
  • Do not dry clean
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd