If a plant (or vehicle) shows as “Unassigned”, an information box will appear beside it. This will occur the first time a plant comes online, or when SmartCap hardware is replaced.
To assign the plant, click on the word “Unassigned”, and select the plant name you wish to assign it to from the dropdown list.
The Plant Devices list contains all unassigned SmartCap hardware. It lists the Alias (name as configured in the display) and the IP address. It is recommended to verify at least one of them before assigning.
NOTE: New plant names can be created in the “Config” menu under “Plants”, or by clicking the “+ NEW PLANT” button.