Firmware Upgrades

This article is about the original SmartCap hardware. For Life by SmartCap hardware, please go to Life by SmartCap

Firmware gets loaded onto the SmartCap display from Fatigue Manager (OTA) or manually via USB. For manual upgrades see “SmartCap Firmware Upgrade User Guide”. Contact your local representative to obtain one. 

The base unit and processor cards get auto-upgraded when physically connected to the display. Processor upgrade via Bluetooth (wireless) is not supported.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd