Follow

Restore Factory Defaults

This article is about the original SmartCap hardware. For Life by SmartCap hardware, please go to Life by SmartCap

Restoring to factory default settings can be done using the CLEAR CNFG option in the display menu. This requires a special PIN. Contact your SmartCap representative if you need this.

 

  1. Go to MENU > ADVANCED > CLEAR DATA
  2. Press OK – see Figure 7 below
  3. Reset the display using the button on the back

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd