Follow

CLEAR DATA from SmartCap Display

This article is about the original SmartCap hardware. For Life by SmartCap hardware, please go to Life by SmartCap

The SmartCap display can store up to 250 days of data. It is recommended to remove all data when manually downloading data from the display.

When the display is (more than) 80% full it will show a warning message on start-up. It is possible to remove all LOG files and buffer files from the display menu.

 

  1. Go to MENU > ADVANCED > CLEAR DATA
  2. Press OK – see Figure 4
  3. Press OK – see Figure 5
  4. Depending on the amount of data it can take many minutes to remove all data

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd