This article is about the original SmartCap hardware. For Life by SmartCap hardware, please go to Life by SmartCap

The first level menu of the SmartCap Display has five options:

  1. Brightness
  2. About
  3. Alarm Rules
  4. Advanced (requires PIN)

To view version numbers of the display, processor card and other information go to MENU > ABOUT.

To view the alarm rules currently configured on the display go to MENU > ALARM RULES. The alarm rules are automatically updated from Fatigue Manager. The standard alarm rules (factory default) are Fatigue Level 4 at 0 minutes and Fatigue Level 3 for 90% of a 45 minute period.





To change the brightness of the screen go to MENU > BRIGHTNESS.

Use the two arrows on the bottom of the screen to change the brightness. The brightness is immediately updated when pressing the arrows. Once the screen has the desired brightness, press SET to confirm and save the setting.


Even after power loss or reset, the display will continue to use the new settings.

Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd