LifeHub - communications overview

SmartCap LifeHub is a database-driven web application that is hosted in the cloud. Below is the data communications overview. 



The primary communications for SmartCap Life is via TCP/IP from the LifeDisplay. The LifeDisplay supports the following connection types:

  1. 3G (WCDMA/HSPA+ Band 1,2,5,8) (Recommended)
  2. In built Wifi (802.11 a/b/g/n/ac) – in-cab antenna only
  3. Customer provided radio via Ethernet (RJ-45) connection
    Only one of the above is required

Satellite communication [optional]

There is also an optional satellite solution available, which can be used to send alarms in case there is no network coverage. In that scenario the data communications overview looks a little different:



Data usage per system for 24 operational hours: 

  Up Down
3G/WiFi* 4MB 3MB
Iridium 100 bytes** N/A

* usage not including infrequent app upgrades and remote support - a flexible data plan or a plan of 1GB/mnth is recommended.

** at typical alarm rate

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd