ITAS Modem Unit Installation

Choose appropriate mounting location on flat surface and clean with isopropyl alcohol or similar. Take care that antenna’s magnetic face is free from metal debris and dirt. 

Connect the connector to mating connector on device or an extension cable if needed. If using an extension cable it is recommended to use a wire gauge of 24 AWG.

When using a GPS antenna ensure the ITAS units is mounted at least 10 cm away from it. Please allow for a 10cm air gap to avoid “detuning” when mounting it onto a metal ceiling.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd