Follow

Installing your Life System

When installing your Life System, you will have the option of mounting it permanently or using a suction cup, depending on the needs and requirements of your workplace.

To mount the display using the suction cup, fasten the RAM™ mount to a flat, clean and smooth surface, such as a windscreen. To determine that the chosen surface is appropriate for a suction cup, clean the surface with a damp cloth or alcohol and ensure that the surface isn't curved or cracked. If the surface is inappropriate the suction cup will fail to create a vacuum, causing the display to fall which may result in a void in warranty. 

Push the suction cup onto the surface and turn the knob clockwise to lock it into place. Attach the arm and display lock the bracket in place by tightening the handle on the arm.

 

To mount the display permanently, mount the base of the RAM™ mount (diamond or round) on a metal wall or plate (min 2mm thickness) using appropriate fasteners. Do not mount the base of the RAM™ mount directly onto the dashboard. Attach the arm and display then lock the bracket in place by tightening the handle on the arm.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Copyright © 2014-2015 · All Rights Reserved · SmartCap Technologies Pty Ltd